• ProJoint™ MAX™  


    A high strength epoxy paving grout - suitable for vehicular areas up to 3.5 tonnes


    Similar to ProJoint™ Fusion™, ProJoint™ MAX™ offers a quick and easy solution to filling joints between paving slabs and setts but in areas of vehicular access. 

    Suitable for natural stone and concrete paving, ProJoint™ MAX™ is a high strength two-part epoxy paving grout and is very simple to use. Resin and sand are supplied ready-mixed within the tub, and only requires the addition of the enclosed hardener to activate the chemical cure.  Once cured, ProJoint™ MAX™ delivers a weed-free, frost resistant joint which resists pressure washing.

    ProJoint™ MAX™ is available in three colours: neutral (buff), mid grey and black.

KEY FACTS:

  • Permeable bedding mix not required
  • Part mixed components for fast application, all supplied within the mixing tub
  • Professional strength, self-compacting and suitable for joint widths of 5mm upwards
  • Weed, pressure washer and frost resistant
  • Ideal for paths and patios as well as driveways or other vehicular areas (up to 3.5 tonnes)
  • Suitable for natural stone and concrete paving, setts and slabs

NOTE:  as sand is a natural product, some minimal colour variance may occur.  As screen colours can vary, the product colours shown above are representative only - for colour selection, cured product samples are available to view at your local stockist. 



  Approximate coverage per 15kg tub:


  Order codes for ProJoint MAX:

Joint Size
600x600mm slabs
Four size Indian
(600mm series)
100x100mm setts
5 x 25mm
22.5m2
19.5m2
4m2
10 x 25mm
11.25m2
9.75m2
2m2
15 x 25mm
7.5m2
6.5m2
1.34m2

 
 
  Pack size:
  15kg
  Pallet quantity:
  50 (can be a combination 
  of product/colour)
  
  Product colour       
  Product code
  Neutral/buff
  MAXN
  Mid grey
  MAXG
  Black
  MAXBK
Due to the high epoxy resin content ProJoint MAX will highlight and enhance the natural surface colours and textures of the paving - this sheen can be especially noticeable on grey paving, including granite, so a test area is advised before use.  It is important to spread the mix across the total paving area to ensure the potential effect is uniform.  Please note that this is a temporary effect; weathering and foot traffic will accelerate its disappearance.  For extra porous paving, or to minimise any effect use ProJoint Fusion or ProJoint V35-UV.

ProJoint MAX is not designed for use with porcelain paving - please see ProJoint Porcelain Primer and Grout product pages for details.


MAX wood landscapes PROMO
Case Study: ProJoint MAX selected for stunning Yorkshire garden re-design

ProJoint MAX in mid grey was selected by the team due to the strength the two part epoxy offers...

Read more

Cleaned paving
Keep your paving looking fabulous!

View our range of PaveCare paving cleaners and sealers

Click here

MAX and vehicle
Need a product for heavier vehicular traffic?

For vehicular traffic areas of more than 3.5 tonnes, please look at ProJoint™ V75-WT™ or V400-WT™

Find out more

  • Contact us now for more information...

  • MORE INFO