• ProJoint™ V75-WT™  


    A two-part epoxy resin mortar system suitable for vehicle areas up to 7.5 tonnes


    A specialist solution to filling joints between paving slabs and setts, suitable for natural stone and concrete paving on pedestrian and vehicular areas with medium to heavy vehicle loads up to 7.5 tonnes.

    The two-part epoxy resin system is easily mixed and quickly applied as a slurry to dampened paving.  Its high performance means that it is used widely for domestic and commercial projects where medium traffic loading is required.

    ProJoint™ V75-WT™ is available in three colours:  neutral (buff), mid grey and black.

KEY FACTS:

  • Permeable bedding mix not required
  • Two part resin based mortar system, cement free
  • Medium to heavy traffic loads up to 7.5 tonnes, ideal for patios, driveways and high traffic areas
  • Self compacting, fast and easy application - without bending or kneeling
  • Professional strength suitable for joint widths of 5mm upwards
  • Weed, pressure washer and frost resistant
  • Suitable for natural stone and concrete paving, setts and slabs
NOTE:  as sand is a natural product, some minimal colour variance may occur.  As screen colours can vary, the product colours shown above are representative only - for colour selection, cured product samples are available to view at your local stockist. 


  Approximate coverage per 27kg kit:


  Order codes for ProJoint V75-WT:

Joint Size
600x600mm slabs
Four size Indian
(600mm series)
100x100mm setts
5 x 25mm
45m2
39m2
8m2
10 x 25mm
22.5m2
19.5m2
4m2
15 x 25mm
15m2
13m2
2.67m2



  Pack size:
  27kg
  Pallet quantity:
  42 (can be a combination 
  of product/colour)
  
  Product colour       
  Product code
  Neutral/buff
  V75N
  Mid grey
  V75G
  Black
  V75B
Due to the high epoxy resin content ProJoint V75-WT will highlight and enhance the natural surface colours and textures of the paving - this sheen can be especially noticeable on grey paving, including granite, so a test area is advised before use.  It is important to spread the mix across the total paving area to ensure the potential effect is uniform.  Please note that this is a temporary effect; weathering and foot traffic will accelerate its disappearance.  For extra porous paving, or to minimise any effect use ProJoint V35-UV.

ProJoint V75-WT is not designed for use with porcelain paving - please see ProJoint Porcelain Primer and Grout product pages for details.



Information

This is a short video which demonstrates the advantages and application of the ProJoint™ V75-WT™ resin pointing system.
V75 application
ProJoint™ V75-WT™ preparation and application

A full preparation and application guide can be downloaded

Download here

Cleaned paving
Keep your paving looking fabulous!

View our range of PaveCare paving cleaners and sealers

Click here

V35 paving and logo
Sensitive or expensive stone?

ProJoint™ V35-UV™ is the perfect product for any sensitive or expensive stone.

Find out more

  • Contact us now for more information...

  • MORE INFO