• ProJoint™ V35-UV™  
    A single part PU resin mortar system with 100% UV stability designed for sensitive stone - suitable for vehicle areas up to 3.5 tonnes


    ProJoint™ V35-UV™ is a very advanced but simple to use solution to filling joints between paving slabs and setts, suitable for all types of natural stone and concrete paving on pedestrian and vehicular areas up to 3.5 tonnes. Specifically designed for sensitive stone, ProJoint™ V35-UV™ is the perfect partner for the most prestigious of projects.

    The single component PU resin is mixed with the sand supplied, and applied to the paving using either a brush or squeegee.  It offers a long processing time which makes it especially suited for paving with narrow joints, large paving unit sizes, and for use in hot weather.  

    ProJoint™ V35-UV™ is available in three colours: neutral (buff), mid grey and black.

KEY FACTS:

  • One part resin based mortar system, cement free
  • Light to medium traffic loads up to 3.5 tonnes, ideal for patios and driveways
  • Long working time so ideal for narrow joints and hot weather with easy application - without bending or kneeling
  • Professional strength suitable for joint widths of 5mm upwards
  • Weed, pressure wasther and frost resistant
  • Suitable for natural stone and concrete paving, setts and slabs
NOTE:  as sand is a natural product, some minimal colour variance may occur.  As screen colours can vary, the product colours shown above are representative only - for colour selection, cured product samples are available to view at your local stockist. 

Approximate coverage per 26kg kit

Joint Size
600x600mm slabs
Four size Indian
(600mm series)
100x100mm setts
5 x 25mm
45m2
39m2
7.6m2
10 x 25mm
22.5m2
19.5m2
3.8m2
15 x 25mm
15m2
13m2
2.5m2
Following application, it is expected that this product may highlight and enhance the natural surface colours and textures of the paving.  This is only a temporary effect as weathering and foot traffic accelerate its disappearance.  Typically the sheen that remains is even and thin and dissipates over a short period of time.  Click here for more details and recommendations.

ProJoint V35-UV is not recommended for use with porcelain paving - please refer to the ProJoint Porcelain Primer and Grout product pages for more information.
V35 application
ProJoint™ V35-UV™ preparation and application

A full preparation and application guide can be downloaded

Download here

Cleaned paving
Keep your paving looking fabulous!

View our range of PaveCare paving cleaners and sealers

Click here

V35 on sawn tallow
Case Study: ProJoint™ V35-UV™ selected for sawn tallow paving

Pete Gregory Landscapes selects ProJoint™ V35-UV™ on a recent project

Read more

Order codes for V35-UV™

Product Code
Item Description
Colour
Pack Size
Pallet Qty
V35UVN
ProJoint™ V35-UV™
Neutral (Buff)
26kg
42
V35UVG
ProJoint™ V35-UV™
Mid grey
26kg
42
V35UVB
ProJoint™ V35-UV™
Black
26kg
42
  • Contact us now for more information...
  • MORE INFO